• Will Sweat Harm My Harness?
  • Should You Use Rope or Webbing to Connect to an Anchor?
  • Choosing Between C4s and Friends
  • Can You Lead On a Static Rope?
  • Can I Use Climbing Bolts For Anchors in a Gym?
  • Are Falls Held or Breaking Strength More Important In a Rope?
  • Does Poop Harm a Climbing Rope?
  • Are Homemade Draws Reliable?
  • Shopping for Economy Carabiners
  • When You Fly, Can You Carry On Climbing Gear?
  • Can I Trust Fixed Draws?
  • Which Helmet WIll Fit My Big Head?
  • Choosing Ice Screw Length
  • Are Adjustable Leg Loops Useful?
  • Should I clip ice screws with Screamers?
  • How do I Make a Bomber Anchor?
  • Can I Modify my Crampon Without Compromising the Integrity?
  • Hot Versus Cold Forging
  • Caring For Your FIngertips
  • Are Sewn Slings Stronger Than Knotted Ones?
  • When to Replace Climbing Webbing
  • Using Grip Dip To Color Code Gear
  • The Benefits of Cotton
  • How to Pull a Rappel Rope
  • How to Properly Orient a Carabiner Gate
  • Are My Fuzzy Quickdraws Safe?
  • How to Stretch Climbing Shoes
  • Are 1/2-inch bolts really better than 3/8-inch?
  • Should I Resole My Rock Shoes?
  • Hand Drill Advice
  • Lonely Climber Looking for Woman
  • Is My Invented Knot Safe?
  • Difference Between Double and Twin Ropes
  • Dealing With an Argumentative Partner
  • Will Antifreeze Ruin Rope?
  • Why Is a Rack Called a Rack?
  • Rock Shoes For a Big Guy
  • Do They Kill Geese To Get Down?
  • How to Wash a Rope
  • Do Cam Teeth Do Anything?
  • Can I Fix Delaminated Rock Shoes?
  • Can I Mix a Static With a Dynamic Rope for Rappelling?
  • Should You Lower Or Rap Through Anchors?
  • Should You Clip the Belay As Your First Lead Pro?
  • How Should The Middle Man Tie In?
  • How Do I Get a Good Climbing Man?
  • Do Falls Weaken Bolts?
  • Should I Rope Solo?
  • Should I Angle Ice Screws Down?
  • How Should Old Climbers Train?
  • Can I Make a Belay Loop?
  • Reusiing Ice Screw Holes
  • Overcoming Fear of Falling
  • Choosing a Stove Fuel
  • Will My Hiking Boots Work With Crampons?
  • Do Heavy People Shock Load the Rope?
  • Can Offset Cams Subsitute for Regular Cams?
  • Can I Resling My Cams Myself?
  • Are Older Alien Cams Safe?
  • Antifreeze
  • The Truth About Climbing Supplements
  • Can I Make My Leashed Tools, Leashless?
  • Rope Stretch Facts
  • How To Cut a Rope Without a Knife
  • Secrets of the Toprope
  • How to Sharpen Crampons
  • Should I Become a Climbing Guide?
  • Preventing Climbing Rope Wear
  • How to Remove an Old Bolt
  • How to Customize Ice Tool Picks
  • Double Rope Facts
  • Do It Yourself Fruit Boots
  • Climbing Rope Sheath Slippage
  • Rockfall Safety
  • Do Screamers Work?
  • Defining the Cheater Stick and Stick Clip
  • Climbing Skin Care
  • Selecting a Gym Rope
  • Quick Links for Climbing
  • Are Russian Cams Good?
  • When To Retire Climbing Gear and Ropes
  • Should I Get a Link Cam?
  • How to Get a Climbing Mate
  • Will Dog Urine Harm My Rope?
  • Using Steel Carabiners for Fixed Quickdraws
  • Petzl Tibloc and Climbing Rope Sheath Damage
  • Overcoming Anger
  • Fixing a Spinning Bolt
  •  
    Video Spotlight
    Ascent. Bringing the Best Climbing Stories to Life.
    Ascent. Bringing the Best Climbing Stories to Life.

    Are 1/2-inch bolts really better than 3/8-inch?

    01-Oct-2010
    By Gear Guy

    Are 1/2-inch bolts really better than 3/8-inch?

    Like the old saying goes, it's not the meat, it's the motion. The meat in this case is bolt diameter, and the motion is either straight-out loading (tension) or straight down (shear). Shear loading, such as you'd get on a less-than-vert wall, tests the bolt shaft's breaking (shear) strength. Tension loading, such as you'd get with a bolt placed in a roof, tests its pull-out strength.

    Forget about shear loading, a good, commonly used bolt such as the Powers PowerBolt and its ilk will not break. A 3/8-inch bolt of this type is rated to 7,000 pounds in 6,000 psi concrete (basically granite) and 4,000 pounds in 2,000 psi concrete (hard sandstone). This is roughly the breaking strength range of carabiners and much higher than any rope's maximum possible impact force. Scaling up your bolt to 1/2-inch using the premise that a 3/8-bolt could break is like carrying wood into a forest.

    Tensile strength is another matter, since bolts can and do pull out, especially in softer rock, although in hard rock a 3/8-inch PowerBolt's tensile strength still exceeds that of the gear you'd clip to it. If, however, the rock is anything less than bullet, the superior holding power of a 1/2-inch bolt, which can be 50 percent higher than that of a 3/8-inch bolt, is worth the extra money and effort.

    Bear in mind that a bolt, regardless of its size, can pull out due to improper placement, such as under-tightening the bolt, not cleaning the hole, and letting the bit wallow and oversize the hole, a properly set 3/8-inch bolt is likely stronger in tension than a badly placed 1/2-inch bolt.

    Bolt length is the final consideration, and this is driven entirely by rock hardness or lack of it. In granite, a 2-inch-long bolt is, for practical purposes, as strong as a 3 1/2-inch-long bolt because both are overkill. Might as well go short there. In softer rock, a longer bolt is stronger (up to twice as strong) in tensile strength, and therefore more desirable, although in really soft rock the only bolts that hold are glue-ins and their 1/2-inch diameter will always win simply because there's more glue in the hole to reinforce the rock and distribute the load better.

    Reader's Commentary:

    Don't want to use Facebook, but still want to comment? We have you covered:

    Add Your Comments to this article:
    Hello